1313 Lyndon Lane, Suite 214, Louisville, KY 40222, (502) 425-2442

Archive:

Posts for: December, 2014

By Howard D. Klein, DMD
December 30, 2014
Category: Dental Procedures
Tags: wisdom teeth  
ExtractingWisdomTeethNowMayPreventDentalProblemsLater

The reason for extracting a tooth may be all too obvious — the tooth is too decayed or damaged to attempt saving. The reason for extracting a wisdom tooth, on the other hand, may not be so apparent: from the perspective of pain or reduced function, you may not notice a thing. Our recommendation to remove a wisdom tooth is based primarily on what may be occurring out of view below the gum line and its potential threat to adjacent teeth.

Teeth grow and develop below the gum line in the jaw, and then push their way through the gums as they appear in the mouth (eruption). After a normal eruption, the enamel-covered crown is visible above the gum line; the remaining tooth root (about two-thirds of the tooth’s length) resides below the gum line. Because wisdom teeth, or third molars, erupt rather late between ages 17 and 25, they may lack the room to erupt properly due to crowding from other teeth that have already erupted. This can cause the wisdom tooth not to erupt fully through the gums, leaving the crown trapped below the gum line, a condition known as impaction. For the tooth, impaction increases the chances of infection, cyst formation and gum disease around it.

An impacted wisdom tooth can also cause problems for the adjacent teeth as well. The impacted tooth may begin to press against the roots of other teeth; the resulting pressure can damage the other roots, increasing the risk for disease or future tooth loss. A person may not even know they have this problem since there’s often little to no noticeable pain or symptoms.

It may seem counterintuitive, but the best time to remove a wisdom tooth is when it’s not causing immediate problems. There will be, however, signs found during examination (particularly x-rays or CT scan) that future problems are in the making. By extracting an impacted wisdom tooth at the appropriate time, we can avoid more serious problems in the future and improve oral health.

If you would like more information on wisdom teeth and your oral health, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “Removing Wisdom Teeth.”


By Howard D. Klein, DMD
December 19, 2014
Category: Dental Procedures
Tags: celebrity smiles   bonding  
ARoyalFix

So you’re tearing up the dance floor at a friend’s wedding, when all of a sudden one of your pals lands an accidental blow to your face — chipping out part of your front tooth, which lands right on the floorboards! Meanwhile, your wife (who is nine months pregnant) is expecting you home in one piece, and you may have to pose for a picture with the baby at any moment. What will you do now?

Take a tip from Prince William of England. According to the British tabloid The Daily Mail, the future king found himself in just this situation in 2013. His solution: Pay a late-night visit to a discreet dentist and get it fixed up — then stay calm and carry on!

Actually, dental emergencies of this type are fairly common. While nobody at the palace is saying exactly what was done for the damaged tooth, there are several ways to remedy this dental dilemma.

If the broken part is relatively small, chances are the tooth can be repaired by bonding with composite resin. In this process, tooth-colored material is used to replace the damaged, chipped or discolored region. Composite resin is a super-strong mixture of plastic and glass components that not only looks quite natural, but bonds tightly to the natural tooth structure. Best of all, the bonding procedure can usually be accomplished in just one visit to the dental office — there’s no lab work involved. And while it won’t last forever, a bonded tooth should hold up well for at least several years with only routine dental care.

If a larger piece of the tooth is broken off and recovered, it is sometimes possible to reattach it via bonding. However, for more serious damage — like a severely fractured or broken tooth — a crown (cap) may be required. In this restoration process, the entire visible portion of the tooth may be capped with a sturdy covering made of porcelain, gold, or porcelain fused to a gold metal alloy.

A crown restoration is more involved than bonding. It begins with making a 3-D model of the damaged tooth and its neighbors. From this model, a tooth replica will be fabricated by a skilled technician; it will match the existing teeth closely and fit into the bite perfectly. Next, the damaged tooth will be prepared, and the crown will be securely attached to it. Crown restorations are strong, lifelike and permanent.

Was the future king “crowned” — or was his tooth bonded? We may never know for sure. But it’s good to know that even if we’ll never be royals, we still have several options for fixing a damaged tooth. If you would like more information, please contact us or schedule an appointment for a consultation. You can learn more by reading the Dear Doctor magazine articles “Repairing Chipped Teeth” and “Crowns and Bridgework.”


By Howard D. Klein, DMD
December 04, 2014
Category: Dental Procedures
Tags: partial denture  
TemporaryToothReplacementwithFlexiblePartialDentures

Modern dentistry offers several great ways to permanently replace missing teeth, including high-tech dental implants and traditional fixed bridgework. But sometimes, for one reason or another, it isn’t possible to have these treatments done right away. If you need an aesthetic way to temporarily replace missing teeth, a flexible partial denture could be the answer you’re looking for.

Certain kinds of removable partial dentures (RPDs) can be used as permanent tooth replacement systems, especially for people who aren’t candidates for dental implants or fixed bridges. But in the past, if you needed a temporary tooth replacement, one of the few alternatives was the type of rigid RPD often called a “flipper.” This consists of a firm, relatively thick acrylic base that supports one or more lifelike replacement teeth. It attaches to the “necks” of existing natural teeth via metal clasps, which gives it stability and strength.

However, the same rigidity and thickness that gives these rigid RPDs their durability can make them uncomfortable to wear, while the acrylic material they are made of is capable of staining or breaking. Over time, the RPDs are prone to coming loose — and they are also easy to flip in and out with the tongue, which gives them their nickname.

Flexible partial dentures, by contrast, are made of pliable polyamides (nylon-like plastics) that are thin, light and resistant to breakage. Instead of using metal wires to attach to the teeth, flexible RPDs are held securely in place by thin projections of their gum-colored bases, which fit tightly into the natural contours of the gumline. Their elasticity and light weight can make them more comfortable to wear. Plus, besides offering aesthetic replacements for missing teeth, their natural-looking bases can cover areas where gums have receded — making existing teeth look better as well.

All RPDs must be removed regularly for thorough cleaning — but it’s especially important for flexible RPD wearers to practice excellent oral hygiene. That’s because the projections that hold them in place can also trap food particles and bacteria, which can cause decay. And, like most dentures, RPDs should never be worn overnight. Yet with proper care, flexible RPDs offer an inexpensive and aesthetic way to temporarily replace missing teeth.

If you have questions about removable partial dentures, please contact us or schedule an appointment for a consultation.